EcoFlow XT60 to 1000W Alternator Charger Cable (1M)

Expand your off-grid capabilities with the official EcoFlow XT60 to 1000W Alternator Charger Cable (1 Meter). Specially designed as a bridge between the high-output EcoFlow 1000W / 800W Alternator Charger main unit and portable power stations equipped with standard XT60 charge input ports, this cable provides a reliable, seamless connection for rapid vehicle-based charging.

High-Efficiency Vehicle Charging

Whether you are touring in a campervan, overlanding in a truck, or setting up power in an RV, this 1-meter cable allows you to feed excess DC electricity generated by your alternator directly into your portable power unit. When using an XT60 output cable connection, the Alternator Charger operates in Charge Mode, delivering up to 500W output (subject to the maximum input voltage and current ratings of your power station’s XT60 port).

Universal XT60 Compatibility

Designed for versatility, this adapter cable connects seamlessly to various portable generators:

• EcoFlow Power Stations: Compatible with EcoFlow models featuring XT60 input ports (such as the RIVER Series, DELTA 2, and DELTA Max).

• Third-Party Solar Generators: Compatible with standard 24V/48V third-party portable power stations that utilize an XT60 solar or DC input port.

Heavy-Duty & Safe Automotive Construction

Built with flame-retardant, high-temperature PVC jacket insulation and thick copper conductors, this cable minimizes voltage drops and thermal buildup during continuous fast charging. Its robust 1m length provides a clean, manageable connection between your mounted alternator charger and your power station without extra wire clutter.

Key Features

• Seamless XT60 Connection: Directly bridges the output terminal of your EcoFlow 1000W or 800W Alternator Charger to any XT60 input port.

• Supports Up to 500W Charging Output: Enables fast Charge Mode power delivery up to 500W max (dependent on the receiving port’s maximum rating).

• Broad Compatibility: Works with EcoFlow power stations (RIVER series, DELTA series with XT60) and third-party portable power generators with an XT60 port.

• Compact 1-Meter Length: Optimal 1m (3.3ft) length keeps vehicle installs tidy, organized, and free from tangled wiring.

• Industrial Automotive Construction: Heavy-gauge copper wiring with heat-resistant shielding guarantees stable energy transmission and low electrical resistance.

• Plug-and-Play Setup: Secure connector design ensures a firm, vibration-proof fit even on rough overland trails.

What’s in the Box

• 1 × EcoFlow XT60 to 1000W Alternator Charger Cable (1 Meter / 3.3 Feet)

• 1 × User Manual & Warranty Document

Technical Specifications

Frequently Asked Questions (FAQs)

Q1: What power station models work with this cable?

This cable is compatible with any EcoFlow or third-party portable power station featuring a standard XT60 input port. If charging from a 24V starter battery system, ensure your power station’s XT60 port is rated to handle higher voltages (typically over 48V).

Q2: What is the maximum charging speed supported through this XT60 cable?

When using the XT60 cable, the Alternator Charger delivers up to 500W of power in Charge Mode. The exact speed will depend on the maximum input current limit of the connected power station’s XT60 port.

Q3: Does this cable support Reverse Charge or Battery Maintenance modes?

No. Because standard XT60 connectors do not contain data communication pins, using this cable limits the system to standard Charge Mode. Reverse charging or trickle battery maintenance requires EcoFlow’s communication-enabled XT150 or 4+8 output cables.

Q4: Can I use this cable with non-EcoFlow portable generators?

Yes! As long as the non-EcoFlow unit has an XT60 DC input port and meets the voltage and current requirements, you can use this cable to charge it from the EcoFlow 1000W / 800W Alternator Charger.

This post is also available in: